How To Use Ultrasonic Jewelry Cleaner


Ultrasonic jewelry cleaners are devices that use high-frequency sound waves to remove dirt and debris from jewelry. These cleaners can help make all your favorite pieces look like new again. They’re especially helpful to clean delicate items like gold, silver, platinum, and gem stones that you don’t want to put in regular cleaners that contain harsh chemicals. Ultrasonic jewellery cleaners provide a gentle way to safely and effectively clean jewelry, helping to keep it looking great for years to come.

In order to get the most out of an ultrasonic jewelry cleaner, there are a few steps users need to follow. Firstly, prepare the jewelry by scrubbing off any dirt or grime with a soft brush and lukewarm water – never use any type of soap or detergent on delicate items as this can cause damage. Place the item in the cleaning tray or basin provided with the device and fill it with tap water or special cleansing solution according to the instructions. Then switch on the device and set it to its recommended settings depending on how dirty your item is – often manual cleaning settings let you adjust levels of power and frequency so you can fine tune exactly how long the piece needs cleaning for. Finally, once you’re done leave your item in a rack or similar structure meant for drying off wet jewellery before putting on your favourite items or storing them away in an airtight container when not in use. Following these relatively simple steps will ensure you get as much benefit as possible out of using an ultrasonic jewellery cleaner for optimal results every time!


To get the most out of your ultrasonic jewelry cleaner, it’s important to choose the right cleaning solution and set up the ultrasonic cleaner properly. First, pick a cleaning solution that is made specifically for cleaning items like jewelry and other metal items (like coins or small figurines). These solutions are usually formulated with ingredients to remove dirt and grime while still being gentle enough to not harm delicate materials like precious stones.

Next, make sure your cleaner is filled to the appropriate level according to its directions. Generally, you will fill the unit with water up to a marked line inside; then you add a few drops of your chosen cleaning solution. Make sure you don’t add too much as this can cause damage or discoloration to some materials (consult the instructions for recommended amount). Then make sure everything is connected securely before plugging it in and turning it on. Finally, adjust any necessary settings such as temperature and timer if applicable and start the machine.

Cleaning Process

To use an ultrasonic jewelry cleaner, first make sure all safety precautions are taken. For instance, do not expose jewelry to the solution for too long and ensure that any precious or delicate items are placed away from the generator. Next, fill the machine with warm water along with a cleaning solution specifically formulated for ultrasonic cleaners. Make sure there is enough liquid for the object in question to be fully submerged during the cycle.

Jewelry Rolling Mill

Once this is complete, plug in the machine and turn it on. Then adjust the cycle depending on how intense of a clean your item needs. If you do not know what setting to use, consult instruction manual as some machines may require more specific settings. Once you have adjusted the cycle setting, set the timer for as long as necessary to get your desired results. Make sure to check on jewelry every 10 minutes or so because leaving it in for too long can cause damage. When finished, unplug machine and carefully remove items. Rinse with clean running water before drying completely with soft cloth or paper towel and then enjoy!

Monitoring the Process

When using an ultrasonic jewelry cleaner, it is important to monitor the cleaning process closely in order to know when the job is done. Begin by closing the lid of the cleaner and turning it on. As it begins working, you will be able to see bubbles forming at the surface of your jewelry pieces; this indicates that the cleaning process has started.If necessary, adjust the power setting or time duration based on manufacturer’s directions. You should also be aware of any noise coming from the cleaner – if it is running too roughly or making sounds that don’t feel normal, you should switch off right away as this can indicate a fault with your machine or damage to your jewelry. Once the recommended time duration has elapsed, open the lid carefully and check your pieces for signs of dirt or other buildup. If there is still some visible dirt present, increase the time duration slightly and test again. When no more dirt can be seen, switch off the machine and let all pieces dry out before re-wearing them or using them further.

Finishing Touches

Once you’ve completed the cleaning cycle with your ultrasonic jewelry cleaner, it’s important to take a few additional steps to ensure your jewelry remains in great condition. The first is to carefully dry off each piece before storing it away. After taking the jewelry out of the cleaner, use a soft cloth to gently pat each item until dry. Be sure to pay special attention to any areas where the liquid may have pooled, such as crevices or grooves, so that no moisture remains. Once you’re sure everything is dry, store your pieces in a safe container or wrap them in soft materials like tissues paper or anti-tarnish fabric to protect against scratching and wear and tear.

Additionally, once your cleaning session is over, it’s time for some simple aftercare. Empty any leftover fluids from the ultrasonic cleaner and give its tank a quick rinse using warm water and dish soap if necessary. You should also wipe down any external surfaces before you store it away for another day. Taking these extra steps means you can continue to get years of flawless results from your jewelry cleaner!

Tips and Tricks

Ultrasonic jewelry cleaners are a great way to clean your jewelry without having to take it to a professional or having to invest in expensive cleaning supplies. To ensure that your ultrasonic cleaner is effective and working properly, there are certain steps you should take when preparing to use the machine. First, you should always make sure that the cleaning solution you use is designed especially for ultrasonic cleaners and not any other type of cleaning product. Additionally, remove all stones or gems that could be damaged by the harsher cleaning solutions as they should be cleaned using a more gentle method.

Did The Archaic Culture Made Jewelry

Next, fill the tank of your cleaner with enough water to cover your pieces with at least 1 inch of clearance above them before adding the cleaning solution. Depending on what kind of material making up your jewelry, the amount of time and setting used may vary significantly so be sure to consult with your manual for precise instructions for each type of material being cleaned.

To get the most out of your device, try mixing different ingredients in the water such as liquid detergent, baking soda and even vodka or rubbing alcohol as alternative solutions known for their deep cleansing abilities. Ultrasonic cleaners are also becoming increasingly popular as an efficient way to thoroughly clean parts and tools used in various home projects or jobs requiring intricate detail work.


Having an ultrasonic jewelry cleaner can greatly benefit anyone who regularly wears jewelry. Most pieces are easily tarnished and can become discolored due to daily use and environmental factors. The ultrasonic cleaning process will help restore the sparkle and brilliance of your favorite pieces as well as helping you save time and money spent in professional care services. Cleaning with a jewelry ultrasonic machine is quite easy but needs to be done carefully, in order to avoid any damage or irreversible alterations. First, make sure that only metal items should go into the tank. Rinse the jewelry off in warm water before placing it in the tank. Fill the tank with cleaning solution – not too much! Set the temperature and turn on the device for approximately 3-5 minutes; some even have custom settings depending on the type of metal being cleaned. When finished, rinse off all jewelry items under running water before drying them with a towel.

In conclusion, owning an ultrasonic jewelery cleaner provides numerous benefits for anyone looking to keep their jewelry looking amazing night after night. It is easy to use, quick and effective at restoring your favorite pieces in just minutes. As long as you follow these simple steps – soaking only metal items in the tank filled with specialized solution followed by proper rinsing and drying – then you’re sure to keep your necklaces, rings, earrings and bracelets looking like new for many years to come!

Send this to a friend