How To Make A Wooden Jewelry Box Plan


A wooden jewelry box is a beautiful addition to any home. Not only does it provide storage for precious jewelry, but it also adds an elegant piece of furniture to the room that it is placed in. Building a wooden jewelry box from scratch offers numerous benefits. It allows you to customize to your specific taste and needs, and choose from a variety of different types of woods and finishes so that the finished product has its own character. Additionally, one can save a lot of money by making their own jewelry box instead of buying one in the store. Furthermore, the process can be extremely satisfying and enjoyable, as it provides an opportunity to create something with your own hands.

Gather the Supplies and Tools Needed

Before you start to make a wooden jewelry box plan, you will need to gather the supplies and tools that are needed. First, buy good-quality plywood for the sides and bottom of the box, and some select hardwood for making the dividers inside. You will also need a router and bits to shape the outside of your box as well as drill bits for making holes for connecting dowels that will reinforce your box. Additionally you will need wood glue, small strips of wood or thin veneer for edging, hinges and a latch to keep your jewelry safe within the box. Lastly, sandpaper, stain or paint and finishing material such as polyurethane will be necessary depending on which look you are going for. It is always important to have all these items ready before beginning any project!

Step-By-Step Instructions for Building the Base

1. Start by selecting your wood materials, such as cedar, pine, cherry, or oak for the box. Be sure to consider the desired size and thickness of wood when selecting your material.

2. Using a piece of thick cardboard or other sturdy material, trace around a template of the desired shape of your jewelry box onto the chosen wood and cut it out with a saw. If needed, adjust the tracing or use sandpaper to create smooth edges on each side.

3. Use small hinges and screws to attach a lid to one side of the box frame that you’ve just created using felt paper or another soft material underneath each hinge to make sure they lay flat against the box itself. These can be found at any local hardware store and typically come in bronze or brass varieties.

4. With carpentry tools such as a chisel or router bit and mallet, hollow out some space along all four sides (inside bottom corners) of the box’s base so that when you flip it over after attaching the hinges and making sure everything aligns nicely, you will have four separate compartments for personalizing your jewelry box with different interior inserts like fashionable velvet linings for extra shine and flair!

5. To make this project even more intricate—as if adding hinges wasn’t enough already—you may opt to add feet on the ends which will elevate it slightly off of a table surface but still provide stability support when placing heavier items inside. To accomplish this look, glue four pieces of 4 x 2-inch pre-cut pieces into each corner before rotating them so they sit flush against one another cleanly when hardened together with an adhesive like epoxy resin glue or white glue.

How Diamonds Are Mined And Made Into Jewelry

6 Finally finish up by dabbing your jewelry box with oil-based varnish (like linseed or tung oil) which adds an extra spiritual touch while deepening its natural color tones without affecting its overall shape too drastically!

How to Create Practical and Attractive Jewelry Compartments

If you are looking for a way to organize your jewelry more effectively, then creating a wooden jewelry box plan is the perfect solution. Building a custom jewelry box will provide you with compartments of different shapes and sizes that can help keep your collection organized. Before starting on the project, it is important to have a good understanding of woodworking basics, as well as basic tools that will be used in the process.

Start by selecting the type of wood you would like to use for your project. Consider the material’s overall appearance, weight, and its ability to resist scratches and UV rays. Next, consider the different sections you will need to create within the box – such as drawers or compartments for necklaces, rings, earrings and bracelets – when planning out your design. You should also decide if you would like any additional features such as spaces in between dividers or even special sections for larger pieces that require secure storage. Once you have created a design with all the measurements written down on paper, trace them onto your chosen type of wood with either a pen or pencil.

Next comes time to start building! Begin by cutting each piece according to your measurements with gloves and safety glasses on, while using caution and paying close attention to detail. After cutting all pieces separately from one another, sand off any unevenness, trying not to touch certain parts too harshly – but also making sure none of them still have rough spots once done. Finally put together all elements of the box applying an effective adhesive so everything stays firmly in place; finally add decorative details if desired before showcasing it proudly and enjoy displaying your jewellery outn front of friends!

Finishing Touches – Sanding and Sealing

Sanding is an essential step in finishing your wooden jewelry box plan and it should not be skipped! Depending on the type of wood you used for your project, sanding will help to maximize its natural beauty. If you used coarse sandpaper like 120 or 150 grit, start with a higher grit like 220 and work your way up. This will help to level out any scratches made by the coarser paper. When you have achieved your desired look and feel, use a soft cloth to remove any remaining dust from the surface of your wooden jewelry box plan before sealing.

Sealing is important if you want to preserve the look and finish of the wood for years to come. There are many different types of sealers available but most experts would recommend using one that includes UV protection as this helps protect against fading caused by sunlight or harsh lighting. A polyurethane is also a great choice because it protects against physical damage as well as moisture damage due to spills or rainwater. When applying the sealer, make sure to evenly apply it in thin coats rather than thick ones, which can cause uneven finished results or pooling areas in certain parts of the piece. Allow each coat to dry thoroughly before applying another coat until the desired coverage is reached. After the final coat has dried completely, buff it with a soft cloth again and admire your beautiful creations!

Jewelry Plural

Troubleshooting Tips for Making the Perfect Jewelry Box

Making a wooden jewelry box requires precision, accuracy and plenty of patience. Even with the most accurate measurements, it is possible to encounter a few problems that can be easily fixed. Here are some tips for troubleshooting a wooden jewelry box plan so it can be perfect:

1. Measure Twice, Cut Once: A good rule of thumb when crafting any woodworking project is to measure twice and cut once. Take your time ensuring all the pieces fit together correctly before cutting them. That being said, even the most careful measurement may still need adjustment after cutting due to warp or other unwanted changes in the wood grain.

2. Pre-Check Your Hinges: Before you start attaching the hinges on any jewelry box plans, check the shape of the hinge first to make sure it fits properly without binding or rubbing against anything else on the box itself. Ensure there is enough room for them to move freely before you start to install them onto your piece.

3. Utilize Wooden Glue: For an extra strong bond between your pieces, use some wooden glue in addition to screws or nails during assembly. This will help ensure no piece wobbles from its original position during everyday use of your jewelry box, making it sturdier in the long run!

4. Sand Properly: When sanding, always work from a rougher grit step to a finer one with each pass over each piece of wood and joinery area, such as where two boards come together at a right angle joint. Start with 80-100 grit sandpaper and move up gradually through 150-220 gritsandpaper finishing off with 400-600 gritsandy paper if desired for that glossy smooth finish!


Once your wooden jewelry box is complete, you will feel a great sense of accomplishment. It takes creativity and craftsmanship to make something that looks nice and serves its purpose. Not only will you enjoy the process of making it, but also the final result of having a beautiful and functional jewelry box. The satisfaction that comes from being able to create something of use out of raw materials adds to the joy of owning a custom piece that can be enjoyed for years to come. Anytime someone asks where you got your jewelry box, or even better compliments on it, you can simply say “I made it myself!”

Send this to a friend