Can You Use Iron Out On Jewelry


Iron Out is a mostly mineral-based product used to remove rust and stains from items like laundry, carpets and other fabrics. It typically consists of phosphoric acid, hydroxycarboxylic acid, and surfactants. There are various types of jewelry including gold, silver, diamond, platinum and titanium. Different types require different methods of cleaning. Gold jewelry can usually be cleaned using mild soap and warm water. Silver jewelry can be polished with a polishing cloth or treated with silver cleaner to bring back its original luster. Diamonds should be wiped gently with a soft cloth while platinum can be cleaned with an ammonia-based solution or a commercial jewelry cleaner. Titanium needs to have a coating applied to protect it from oxidizing and this can then be removed using a clean polishing cloth.

In conclusion – Can You Use Iron Out on Jewelry?

The answer is no; Iron Out is not suitable for use on jewelry as it contains harsh chemicals that could damage the delicate surfaces of jewelry pieces. Although it may remove rust, this could potentially sour any precious metals leading to permanent damage in some cases. It is best to use the appropriate cleaning method depending on what type of jewelry you have. Your local jeweler should also always be happy to help advise on the best care instructions for each type of metal or stone used in your jewellery design.

Overview of Jewelry Cleaning Solutions

Iron Out is not generally recommended for cleaning jewelry, as it contains harsh chemicals that could potentially damage fine jewelry. However, if your jewelry does not have special treatments or is made from a durable material, you may be able to use Iron Out as a last resort. To do so, make sure to dilute the cleaner if it’s concentrated. Fill a container with warm water and add 1 tablespoon of Iron Out and mix until the solution dissolves completely. Soak your jewelry in the solution for 3–5 minutes and then rinse thoroughly with cool water. Allow the piece to air dry before wearing again. You may need to repeat this process several times to achieve the desired level of cleaning or shine. When finished, thoroughly rinse your jewelry with clean water and dry it off before storing it away.

Benefits of Cleaning Iron Out on Jewelry

Cleaning jewelry with Iron Out can provide some valuable benefits, such as restoring a brilliant finish, getting rid of stubborn dirt and grime buildup, and revealing a silver or gold luster underneath. It is an ideal solution when cleaning tarnished jewelry or other objects made of electroplated material. When using Iron Out on jewelry, it is best to apply the product using a soft cloth and rub lightly in a circular motion to buff out any particles or residue left behind. This process will remove any surface-level dirt without compromising the finish of the item. Additionally, the Iron Out solution can help remove difficultly-stainless surfaces caused by rust or oxidation from scratchy materials like steel or pyrite stone which are often found in costume jewelry. Lastly, Iron Out helps bring back to life faded items made from different metals (such as sterling silver). After application, you may need to rinse the piece off with clean water but should see a noticeable difference after cleaning with Iron Out.

Simple Jewelry Box

Which Jewelry Is Compatible With Iron Out?

Iron Out is an effective cleaning and rust removal product made from sodium hydrochlorite. It is great for ridding household surfaces and items of rust as well as eliminating tough stains by breaking down dirt and grime. However, it can be damaging to jewelry. The only jewelry compatible with Iron Out is jewelry made out of materials that are not delicate such as titanium, stainless steel, platinum, and gold-filled pieces. Iron Out should never be used on jewelry made of precious gemstones or soft metals such as silver, copper, brass, bronze and plated metals because they can easily get damaged by the chlorine present in Iron Out.

Steps to Clean Different Types of Jewelry with Iron Out

1. Silver Jewelry: Fill a bowl with one part Iron Out and two parts warm water. Place silver jewelry in the solution, then use a soft-bristle brush to scrub away tarnish. Rinse the jewelry off with clean water and dry with a soft cloth.

2. Gold Jewelry: Put one teaspoon of Iron Out into a bowl, then add enough warm water to cover the gold jewelry you will be cleaning. Allow it to sit for 5 minutes before rinsing it off throughly with clean water and drying it with a cloth.

3. Gemstones: If you’d like to clean gemstone jewelry made from rubies, emeralds, or other fragile stones, avoid using Iron Out — as it is too harsh for delicate materials and could cause damage such as discoloration or fading of finish over time. Instead, opt for an untreated ultrasound cleaner that is specifically designed for cleaning gemstones.

4. Costume Jewelry: Costume jewelry should never be cleaned with Iron Out as it may remove details from the piece or cause rusting on metal components due to the chemical reaction created when mixed with moisture and air humidity levels found in typical household environments. The most effective way to clean costume jewelry is by using mild detergent mixed into warm water, lightly brushing the surfaces gently with a soft bristled brush, rinsing them off before leaving them out to air dry overnight.

Precautions to Take When Using Iron Out on Jewelry

When using Iron Out on jewelry, remember to take the following precautions:
1. Use the Iron Out solution on a soft, non-abrasive cloth and gently rub against the jewelry. Avoid direct contact with the Iron Out solution as it may cause damage to some pieces of jewelry.
2. Always read and follow the instructions listed on the label before use.
3. After using Iron Out to remove any rust, rinse off the Jewelry thoroughly with water, making sure all suds are washed away.
4. Dry off your jewelry with a lint-free cloth and store in an airtight container when not in use to prevent further rusting.
5. If attempting to restore vintage or antique pieces of jewelry with Iron Out be sure to consult a professional first as some metals can be easily damaged while others are not suitable for this type of cleaning solution at all so proper care needs to be taken to ensure no damage is caused.

Do Bridesmaid Need Jewelry

Warning Signs of Damage Due to Iron Out on Jewelry

Iron Out can cause severe damage to jewelry, especially if it consists of delicate gold and silver. Iron Out is an oxidizing agent that strips away tarnish and grime. But when used on jewelry, it can corrode the surface and leave permanent discoloration or pits. Iron Out can also strip away the patina on antique jewelry, ruining its value and precious beauty. Warning signs of iron-out related damage to jewelry include visible discoloration, black patches, green streaks, and holes or grooves in the metal surface.

Tips to Keep Jewelry Clean and Lasting

Using Iron Out on jewelry is not recommended due to the harsh chemicals that are in Iron Out. If you have jewelry made of silver, gold, or other metals, a mild liquid detergent should be used in warm water with a soft bristled brush. This is an appropriate way to clean your jewelry as it keeps its original color and shine. After washing your jewelry, remember to dry your pieces carefully with a soft cloth before putting them away. It is also important to use tarnish-free polish on sterling silver pieces to prevent further oxidation and wear of the metal. Furthermore, store each piece individually in an airtight box or bag—plastic bags are best for this purpose—so they don’t get scratched by nearby items and prevent moisture from clouding up the gems. All of these steps should help ensure that your delightful treasures will remain sparkling and beautiful for many years to come!


Q: Can you use Iron Out on jewelry?

A: While it is safe to use Iron Out on most metals, this product should not be used on jewelry made from soft metals, pearls, or stones. Iron Out contains sodium hydroxide which can cause damage to softer materials. If you’re trying to remove rust stains from jewelry, look for specialty cleaning supplies designed for use on soft metals and delicate materials.


No, ironing out jewelry is not recommended. Iron Out powder and liquid products are specifically designed to remove rust stains from hard surfaces like porcelain and tile. This type of product should not be used on any type of jewelry as the strong solutions used to remove rust could damage even the toughest metals. Additionally, some gemstones may be damaged or discolored during treatment with any type of harsh chemical cleaner. Jewelry pieces should instead be cleaned by dipping them in a soapy solution and then gently scrubbing them with a soft toothbrush or cloth.

Send this to a friend